menu

86-21-61182468

vip@shanghaiwpc.com

Wpc Product Introduction

HomenewsOn the strengthening of the floor structure
HomenewsOn the strengthening of the floor structure
2017-06-12

On the strengthening of the floor structure

On the strengthening of the floor structure

On the strengthening of the floor structure: balance paper, substrate, decorative paper, wear layer

1, to strengthen the decorative floor of the floor is an important manifestation of the floor color. So directly to bring people visual impact is the color of the floor. There are hundreds of brands on the market to strengthen the floor, from the surface that is the difference between the color, but I wonder if you understand, strengthen the floor of the decorative paper is divided into domestic paper, ink and imported paper, ink? What is the difference between domestic and imported? Generally imported paper and paper produced by the decorative paper, color clear, three-dimensional sense of strong, anti-ultraviolet light is not easy to fade, and domestic, especially poor quality decorative paper printed out blurred, after Sun exposure of the floor about half a year will appear fading phenomenon.

2, wear-resistant layer is to strengthen the durability of the floor. Wear-resistant layer of wear-resistant degree depends on the strengthening of the floor of the processing technology, strengthen the floor of the processing process determines the final use of the floor. General home to strengthen the floor wear more than 6000 can be. But good to strengthen the floor by the impact of processing technology, wear resistance, stain resistance are good to reflect. Wear-resistant quality of the floor products are more and more bright, no matter how long the use of non-pollution, and wear-resistant quality of the floor after the use of a period of time after the gradual pollution and no longer bright. The reason is that in the strengthening of the floor in the production process, is through the high temperature hot pressing of 240 ° wear layer, substrate, pattern paper, balance paper paste together, wear layer melting through the high temperature of 240 °, due to processing Conditions, the melting of the wear-resistant layer in the separation of the moment with the pressure plate will produce static electricity, these static electricity and no fully cured wear-resistant layer of adhesion, making the wear-resistant layer surface to form many tiny pinholes, so the floor only With a period of time, the stains to penetrate into the floor under the wear layer, the formation of the surface of the phenomenon of pollution. On the contrary, high-quality wear-resistant layer because there is no static in the processing link, do not produce surface space, strengthen the floor will be more use the more bright.

3, substrate, floor, an important manifestation of environmental protection. Now the national E1 level standard value is: E1 level ≤ 1.5mg / L, the national E0 level of the standard value is: E0 level ≤ 0.5mg / L. As long as the E1 level, it belongs to qualified flooring products. So the quality of the substrate not only affect the environmental protection coefficient, but also determines the floor to strengthen the price of the market, low formaldehyde content of the product cost is relatively high, otherwise the price is slightly lower, generally can be produced by the product inspection report can determine the floor The environmental protection.

FEEL FREE TO SEND A MESSAGE